Feel that your bathtub is in dire necessity of replacement but don’t want to waste your whole weekend doing more of these tedious and boring job? If the reply is in the affirmative then Tub reglazing is just the right option in your case. This may require you more then 4 to five hours and then your bathtub will likely be just like new.

You will be wondering whenever you do the daunting task of reglazing all by yourself. The reply is, you definitely will if you take care of few things. The first thing that you must remember while reglazing is your own safety. This may prove to be fatal if all thecorrect protective measures will not be taken. You should cover every possible part if your body as the chemicals used in the process is toxic. It is preferable that you just do the work in an open area.

You are now armed for bathtub resurfacing The first step is always to clean your tub thoroughly You should clean take away the gasket and the caulk when you rinse the tub. You can see many chemicals inside bath refinishing kit. Out of all the chemicals the foremost and the next are for the purpose for cleaning. You will use the first chemical to scrub th face of a tub and also the second solution you can make the surface sore and rough.

You need to then make sure that no oil is there on any part of thebathtub. If you find oil then the “primer” will be unable to grip properly. Next, you need to make use of the third solvent to get rid of the sediment if any. Now the outer lining is ready for the “primer”. Withf sponges you will need to spread the reducer. You’ll have to then leave the solution on the tub for about thirty minutes. You will need to clean with primer reducerto make sure that the outer lining is totally dry. You need to rinse the tub several times to confirm dryness.

Next you need to protect the outer lining area with bathtub refinishing in areas where it is not applied. These areas need to be cautiously wrapped with paper tape. You should check the seal carefully. You must apply base coat in the tub after sealing off the remianing area. During this time ventilation is important and you need to use respirators if you have them at your home. You should read through the manual thoroughly while mixing the primer’s component. You can spray t on the tub using a spraying gun or something just like that.

You are nearly done with refinishing. Your next job is to color your tub. Here you are able to let your imagination run wild and you can also choose prints. However refer to the manual carefully while mixing the painttogether to the topcoat. Apply the topcoat after thirty minutes have passed from your time of applying the primer. You should use a sprat gun to apply the topcoat. You’re completely done now. Wait for at least 72 hours before you step into your new reglazed bathtub.